Screw In Ground Socket

Screw the socket in to the ground or sand with the bar supplied - Can be easy relocated again and again.

Suitable for use with any rotary lines or parasols.

Fits from 17mm - 55mm Diameter poles.

Instructions:

• 1. Remove the hanging tab
• 2. Insert the bar supplied through the top of the socket
• 3. Screw the socket into the ground
• 4. If the ground is too hard, wind the socket back slightly and pour water into the top hole and leave for a while (Repeat if required)
• 5. Finish screwing the socket into the ground
• 6. Suitable for pole diameters from 17mm - 55mm
• 7. Can be used with any rotary lines, small and large parasols, camping equipment, signs or sports nets
• 8. Secure the pole tightly by tightening the top nut